With the continuous progress of market demand and technology, the narrow seam of the narrow side splicing screen has now reached ≤0.88mm, and the seam span of the narrow side splicing screen has broken through zero in only about two years, which makes people marvel at the rapid progress of commercial splicing screen display technology. Today, 1.7mm splicing products are still hot, and 0.88mm products have appeared, "the seam is not small, only smaller", narrowed.

1、 Overview of 0.88mm splicing screen

The LG 55 inch 0.88mm splicing screen, with a 0.44mm single-sided slot on all sides, has once again become a new record in the splicing screen display industry. It has become a small splicing screen display product in the market. The size of the 55 inch 0.88mm splicing screen machine is 1210.51mm * 681.22mm, with a brightness of 700 cd/m2. The 55 inch 0.88mm splicing screen also adopts a four sided design, and the entire machine uses LG original modules for more stable performance.

2、 0.88mm gap and seamless splicing screen

At present, in the commercial display industry splicing screen market, the concept words "seamless splicing screen" and "0mm splicing" have lasted for a long time. In fact, all the people know that these concept words are not real awning splicing, and they are not 0mm. It is mainly processed by secondary technical means to achieve a visual awning effect. Although the physical joint can not be eliminated, but after all, the image presented by the splicing screen is through the visual perception of people, so there is a new idea: from the visual "change the magic" - optical seamless splicing screen is such a product.

3、 Narrow edge splicing screen overview

The optical narrow side splicing screen is the so-called narrow side splicing screen, but there is still physical splicing, the physical splicing of the optical narrow side splicing screen does have 0.1mm, this is because the optical narrow side splicing screen must retain the physical splicing joint of 0.1mm when splicing optical glass, because the optical glass thermal expansion and cold contraction have 0.1mm active gap. The damage caused by the extrusion of optical glass to the splicing screen is avoided. This is a common narrow side splicing screen, commonly known as 0 mm narrow side splicing screen, the principle of this no-top splicing is to install a special led patch on each black splicing screen, through power and lighting, this led chip function to achieve the image display effect of led Mosaic screen, and the Mosaic screen fusion rate of more than 95%, The large Mosaic screen looks like an oversized LCD TV.

Therefore, the 0.88mm seam is a small gap in the market for true LCD panels. With the continuous improvement of technology and market demand, true seamless panels will one day be presented to us, and a visual feast is about to come!